Regarding how to maintain a wheel loader, let's explain it to you below
1. Before the wheel loader works, check whether the fasteners and pipe joints are loose, and whether the pipeline is deformed or damaged.
2. Before the first operation of the hydraulic pump of the wheel loader, the pump should be filled with oil, and it is strictly forbidden to run it empty.
3. When the hydraulic pump of the wheel loader is started, it should be connected and run to confirm that it runs flexibly and normally without abnormal noise before working.

4. If the working pressure of the distribution valve of the hydraulic system of the working device exceeds or is lower than the specified value, it should be adjusted in time.
5. After the system works stably, in addition to observing whether there are abnormalities in oil temperature, pressure and sound at any time, it is also necessary to pay attention to the working conditions of the hydraulic cylinder, hydraulic motor, reversing valve, overflow valve, etc., as well as the oil leakage and vibration of the entire system.











