1. During operation, the road roller should start first before it can start to vibrate, and the internal combustion engine should be placed at a medium speed first, and then adjusted to a high speed.
2. Stop the engine first when shifting and reversing, and reduce the speed of the internal combustion engine when shifting.
3. It is strictly forbidden for the roller to vibrate on a solid ground.
4. When rolling the soft roadbed, it should be rolled 1-2 times without vibration, and then vibrated and rolled.
5. When rolling, the vibration frequency should be consistent. For vibratory rollers that can be adjusted for you, the vibration frequency should be adjusted before operation, and the vibration frequency should not be adjusted without vibration.
6. The adjustment of the reversing clutch, the shock clutch and the brake should be carried out after the main clutch is disengaged.
7. When going up and downhill, you cannot use the fast gear. During sharp turns, including the articulated vibratory rollers rolling around in small turns, it is strictly forbidden to use the fast gear.
8. The roller must not engage vibration when driving at high speed.
9. When stopping, stop the vibration first, then put the reversing mechanism in the middle position, the transmission in neutral, and finally pull up the handbrake lever, and the internal combustion engine will turn off after idling for a few minutes.
10. Other operating requirements should comply with the regulations of static pressure rollers.
